Temperature and humidity chamber newsletter

Temperature and Humidity chamber

 

The Temperature and Humidity Chamber is mainly to test the adhesive resistance property and the holding adhesive property of the pressure sensitive tape. The static loading test: paste the tape to the testing board, timing for a period, and evaluate the halding adhsion property according to the distance the tape slips or the time it takes. This machine can simulate high temperature and high humidity/high temperature and low humidity/low temperature and high humidity/low temperature and low humidity conditions. High standard procedure and control system are attached for good testing environment.

 

The Main Technical Parameters:

Material: SUS#304 stainless steel board for inner part, and advanced paint coated for outside

Heat preservation material: fine glass silk + PU foam

Thickness of the steel board: 1.5mm-2.0mm

Width: 40-50 mm

Length: 60-125mm

Temperature range: -20°c--150°c

Humidity range: 20%RH-98%RH

Load: 1KG

Precise:±0.5°c, ±2.5%RH( should be measured 30 minutes after the sensor is stable)

Uniformity: ±0.5°c-±2.0 °c; ±3%RH (should be measured at the position 1/6 away from the wall and 30 minutes after the sensor is stable)

 HD-40T Temperature and humidity chamber

 

CONTACT:

temperature humidity chambers

+86-023-81987499

info@chinalaboven.com

FOR MORE:chinalaboven

Address

Tongxing Industrial park, Liangjiang new district, Chongqing, China